mobile signal booster-NFK Technology

Mobile Signal Booster

NFK Technology is providing a service of mobile signal booster since several years,we are located in mumbai-thane, we solve a network problem 100% and do complete installation with dignity of work. Our client is on all over india in major cities. We have all Type of mobile signal booster-GSM mobile signal booster, cdma mobile signal booster, 2g mobile signal booster, 3G mobile signal booster for all operators or single operator as per client wish.

mobile operators using diffrent frequency TRAI Allocate 900-1800 MHZ for GSM-2G network,in this frequency mobile signal booster will only boost GSM/2G network, give you best voice clearity,completely stopped dropped and missed calls, voice break give your mobile extra life. 2100 MHZ for only 3G,this is only for internet not for voice(GSM or CDMA), if you want to boost only 3G mobile signal then you have to buy 3g mobile network booster and if you want both 2g+3g then you have to buy 900+1800+2100 MHZ mobile signal booster.

Do not confuse in the name of mobile signal booster because this is called by several diffrent names names like mobile signal booster / repeater,cell phone repeater / booster,gsm dual /single band booster, mobile network booster, mobile network repeater/enhancer etc.it is required when you have lots of signal issue, call dropped problem, voice disturbance, running to a window frequently to recieve a call etc. This problem will only solve by mobile signal booster, there is only one solution for this problem. This issue occure when you are far from the mobile tower or big trees etc.

Now a day's network play important role,we are totally depend on network. So if you want to get connected with network and you suffer network problem mobile signal booster is only one solution

NFK mobile signal Booster is used to provide Radio Frequency (RF) coverage to areas which either lack signal or lack the required signal strength for adequate mobile phone performance. Insufficient coverage may occur both indoors and outdoors and can include such areas as office buildings, Basements, parking garages, apartment buildings, shopping malls and residential homes. The weak coverage problem can be solved by installing an active Booster system designed for use in a multitude of installation configurations.

mobile signal Booster systems provide an effective solution by redirecting, filtering and amplifying the available signal at the pick-up antenna, into the weak coverage area, through a properly selected interior coverage antenna.

NFK Technology provides a wide range of 2G/3G mobile signals Booster. We provide the solution for offices, home, factory, warehouse, showroom, basements, conference center, trading estate, industrial units, hotels, resorts, governmental complexes, universities etc. We have the solution for all network/operator including Tata DOCOMO, Airtel, MTNL, BSNL, MTS, Reliance, Idea, Vodafone, UNINOR, VIDEOCON etc. Our primary goal is to provide the complete mobile solution to our customer and 100% satisfaction

Mobile signal booster function

NFK Technology Provides Booster/Repeater operates on the 900-1800 MHz frequency, a frequency used by most cellular networks in india. This is a full kit, including all the antennas and cabling required. Signal Booster is a effective equipment which designed to pick up the outdoor reception from service provider's cell phone tower and amplify it.

  • Covers up to 15,000 SF.
  • Extends the GSM signal coverage
  • Reduces dropped calls, signal fades, or no-service conditions.
  • Improves sound quality, range, and system access.
  • Allows multiple phones to be used.
  • Over 100% increase in signal strength.
  • Increases Cell Phone Signal Indoors and outdoors.
  • Is Suitable for Applications of Indoor Signal Enhancement: offices, houses, shops, stores, super-markets, department stores, hotels, car parks and etc.
  • This Transfers all network providers GSM and 3G signal. Airtel, Vodafone, BSNL, Idea, Aircel, Spice, Reliance, Cellone, Videocon, Tata, MTS and works on all phones including iphone. The mobile signal will then be transfered to the area with low signal. Simple and highly effective.

    Mobile Signal Booster Accessories

    RF Connector

    RF-male-connector RF-male-connector

    LMR 400 N Male crimp right angle Connector
    Frequency Range- DC-3GHz/6GHz/11GHz
    Characteristic Impedance- 50ohm
    VSWR =1.20
    Contact Resistance inner conductor: =10mO
    outer conductor: =2.5mO
    Dielectric Withstanding Voltage =2500V
    Cable –LMR600, LMR500, LMR400, LMR300,LMR240,
    LMR200, RG223, RG8, RG6,

    RF-half-inch-male-connector RF-half-inch-male-connector

    1/2 Inch N Male crimp right angle Connector
    Frequency Range- DC-3GHz/6GHz/11GHz
    Characteristic Impedance- 50ohm
    VSWR =1.20
    Contact Resistance inner conductor: =10mO
    outer conductor: =2.5mO
    Dielectric Withstanding Voltage =2500V
    Cable –LMR600, LMR500, LMR400, LMR300,LMR240,
    LMR200, RG223, RG8, RG6,

    RF-female-connector RF-female-connector

    N Female crimp Connector
    Frequency Range- DC-3GHz/6GHz/11GHz
    Characteristic Impedance- 50ohm
    VSWR =1.20
    Contact Resistance inner conductor: =10mO
    outer conductor: =2.5mO
    Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.

    RF Cable

    R/F 400 coaxial cable : R/F 400 cable connects the outdoor antenna to the amplifier, and a R/F 400 cable connects the amplifier to the indoor antenna.

    LMR-400-cable LMR-400-cable

    LMR 200 cable
    Frequency Range- DC-3GHz/6GHz/11GHz
    Characteristic Impedance- 50ohm
    VSWR =1.20
    Contact Resistance inner conductor: =10mO
    outer conductor: =2.5mO



    LMR-200-cable LMR-200-cable

    LMR 400 cable
    Frequency Range- DC-3GHz/6GHz/11GHz
    Characteristic Impedance- 50ohm
    VSWR =1.20
    Contact Resistance inner conductor: =10mO
    outer conductor: =2.5mO
    Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.

    1/2-inch-cable 1/2-inch-cable

    1/2 inch cable
    Frequency Range- DC-3GHz/6GHz/11GHz
    Characteristic Impedance- 50ohm
    VSWR =1.20
    Contact Resistance inner conductor: =10mO
    outer conductor: =2.5mO
    Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.

    Antenna

    High gain outdoor Antena : This antenna is mounted outside and receives the mobile phone signal. The antenna is directional, and so is designed to point toward the nearest mobile phone mast to receive the maximum signal possible. Indoor antenna (7.5dBi) : The indoor antenna rebroadcasts the boosted signal. Unlike the outdoor antenna, this one is Patch-directional, and so broadcasts signal equally in directions. It is therefore designed to be placed in any wall where you wish to receive signal improvement.

    Omni-antenna Omni-antenna

    Omni Antenna/ Ceiling Mount Antenna Frequency – 800 -2500Mhz
    V.S.W.R – ≤1.5
    Gain – 3dbi / 4Dbi / 5Dbi / 7Dbi
    Band Width- 136/790-MHz
    Impendence- 50 ohms
    Polarization- vertical
    Connector- N female or CConnector- N female or Customized


    Patch-panel-antenna Patch-panel-antenna

    patch panel Antenna
    Frequency – 800 -2500Mhz
    V.S.W.R – ≤1.5
    Gain – 7Dbi / 8dbi/ 10 ± 1 DBI
    Band Width- 136/790-MHz
    Impendence- 50 ohms Polarization- vertical
    Connector- N female or Customized


    yaagi-antenna yaagi-antenna

    Yaagi Antenna
    Frequency – 800 -2500Mhz
    V.S.W.R – ≤1.5
    Gain – 10Dbi / 12dbi/
    Band Width- 136/790-MHz
    Impendence- 50 ohms Polarization- vertical
    Connector- N female or Customized


    Splitters

    2-way-splitter 2-way-splitter

    2 Way Power Splitter
    Frequency – 800-2500MHz
    Average Power - 200W
    Splitter Type – 2 way cavity Type
    Connector Type- N Female
    Ingress Protection- Indoor
    3rd Order IMD(dBc) - NO IM3
    Dimension - 210.6x60.2x25 Net Weight - 160g


    3-way-splitter 3-way-splitter

    3 Way Power Splitter
    Frequency – 800-2500MHz
    Average Power - 200W
    Splitter Type – 3 way cavity Type
    Connector Type- N Female
    Ingress Protection- Indoor
    3rd Order IMD(dBc) - NO IM3
    Dimension - 235.2x60.2x25
    Net Weight - 180g

    4-way-splitter 4-way-splitter

    4 Way Power Splitter
    Frequency – 800-2500MHz
    Average Power - 200W
    Splitter Type – 4 way cavity Type
    Connector Type- N Female
    Ingress Protection- Indoor
    3rd Order IMD(dBc) - NO IM3
    Dimension - 235.2x60.2x25
    Net Weight - 200g


    Coverage area is based upon a minimum outside signal strength of 65% or better. As outside signal strength decreases, coverage area decreases. If there is no signal outside, this unit will not give you any improvement in coverage.

    We perform installations, custom design engineering and site surveys anywhere in India - Call Us For More Details- 07208 26 27 88 We can help you make the right decision.

    Our Range Includes :

  • CDMA- 800 Mhz(Single Band)
  • GSM- 900 MhZ (Single Band)
  • GSM -1800 Mhz (Single Band)
  • 3G 2100 Mhz (Single Band)
  • GSB- 900 Mhz + 1800 Mhz ( Dual Band)
  • GSM + 3G- 900 Mhz + 2100 Mhz (Dual Band)
  • GSM + 3G -900 Mhz + 1800 Mhz + 2100 Mhz (Tri Band)
  • Note:- Booster available for the AREA Start from 150Sft To More than 15,000Sft.
  • mobile signal booster

    Quick Enquiry